Switching Power Supply 75W Single phase output S-75-24

Switching Power Supply 75W Single phase output S-75-24

switching power supply,switch power supply,DC power supplyProtection:Over load,over voltage,short circuitProfessional export

  

1.Low price and high reliability 2.105 output capacitor3.AC input power suitable for the world4.High efficiency and low operation temperature5.Soft-start current can reduce the AC input impact effectively6.With short-circuit and overload protection 7.Compact size, light weight8.100% full-load burning test9.Installed with EMI filter, minimum wave

85-130/170-264V 50/60Hz 24V 0-3A CE ROHS 159*97*38mm

modelPerformance S - 75-75-5 S - 12-75-15 "S" S - 75-24Output voltage dc 12V 5V 15V 24VOutput voltage tolerance of ± 2% (2) ± 1% of ± 1% of ± 1%Rated output current 15 years 6.3 A 5A 3.2Output current range 0-0-0 deg 4.2 A 3.4 - A 0-2.1Ripple noise (3) 70mVp - p 100mVp - p 100mVp - p 100mVp - pIn the stability (note 4) ± 0.5% ± 0.5% ± 0.5% ± 0.5%Load stability (note 5) ± 1% ± 0.5% ± 0.5% ± 0.5%Dc power output 75W 75.6 W 75W 7.68 WEfficiency 71% 78% 78% 82%Dc voltage adjustable scope + 10-5% ± 10% ± 10% ± 10%Input voltage range from 85 132VAC / 47-63Hz, 170-264VAC by switching selection 63Hz; 47 - 240-370VDCThe input current 1.6 A / 115V 0.8 230V/ACurrent cold start current 18A 36A 230V / 115V /Leakage current < 0.5 mA / 240VACOverload protection 105% ~ 150 type: PULSING HICCUP: automatic SHUTDOWN resetOver-voltage protection 105% ~ 150%High temperature protection...The temperature coefficient (0 ~ 0.03% ± 50 ° c),Start up, maintain and 200ms time, 30ms 100ms,10 ~ 500Hz extent, 2gb 10min. / 1 cycle, duration 60 points, the axisSex between input and output voltage 3KVAC: input, output KVAC shell: 1.5 KVAC: 0.5 shellThe input and output, isolating resistor between input and output and the shell, 500VAC / 100M shell: OhmsWorking temperature, humidity - 10 ° ~ + 60 degrees, the 20% ~ 90% RHStorage temperature, temperature - 20 ° ~ + 10% ~ 85 ° c, 95% RHShape dimension 38mm * * 97 159 shell: 901Weight 0.5 KgsSafety standards, TUV EN60950 UL1012 meetEMC standards comply with IEC801-4, IEC555-2Note: 1, the above parameters test conditions for rated load 230VAC: input, 25 °, humidity 70% RH.2, tolerance, including setting tolerance, stability, load stability (note 5).3 and the ripple 20MHz test: with A12 "twisted-pair cable, interrupted by 0.1 uF & 47uF capacitor circuit.4, into line voltage stability test: full load into the lowest to the highest line voltage voltage.5 and stability test: load load from 0% to 100%.6 and C2 3,6, must be pulled down

S-15-3,S-15-5,S-15-12,S-15-15,S-15-24,S-15-36,S-15-48,S-25-3,S-25-5,S-35-7.5,S-25-12,S-15-15,S-25-24,S-25-36,S-25-48,S-35-5,S-35-12,S-35-13.5,S-35-15,S-35-24,S-35-36,S-40-5,S-40-12,S-40-24,S-40-15,S-50-5,S-50-12,S-50-13.5,S-50-15,S-50-24,S-50-36,S-50-48,S-60-5,S-60-12,S-60-15,S-60-24,S-75-5,S-75-12,S-75-15,S-75-24,S-75-36,S-75-48,S-100-5,S-100-7.5,S-100-12,S-100-13.5,S-100-15,S-100-24,S-100-36,S-100-48,S-145-5,S-145-12,S-145-13.5,S-145-15,S-145-36,S-145-48,S-145-24,S-150-5,S-150-12,S-150-13.5,S-150-15,S-150-36,S-150-48,S-150-24,S-201-5,S-201-12,S-201-13.5,S-201-15,S-201-36,S-201-48,S-201-24,S-240-5,S-240-12,S-240-13.5,S-240-15,S-240-36,S-240-48,S-240-24,S-250-5,S-250-12,S-250-13.5,S-250-15,S-250-36,S-250-48,S-250-24,S-350-5,S-350-12,S-350-13.5,S-350-15,S-350-36,S-350-48,S-350-24,S-400-5,S-400-12,S-400-13.5,S-400-15,S-400-36,S-400-48,S-400-24,SP-500-12,SP-500-24,SP-500-13.5,SP-500.

Switching Power Supply 75W Single phase output S-75-24